Power any device anytime, anywhere by using its own AC
This power station comes with a super high
capacity rechargeable lithium ion battery (24V 63.8Ah or
) and a 1000W
power inverter that
converts the battery power to 110V AC power just like the power source in your
office or home wall outlet. Just link the power inverter to the battery, then
plug your device's AC power adapter to the power inverter
If you do not need to disconnect battery with inverter very often, you may use connection cables come with inverter that have two rings on two ends of cables, connect battery with inverter:
If you need to disconnect battery with inverter frequently, you may use optional cables with EC5 connectors: one set connect to battery, one set connect to inverter. This will make it is very easy to connect and disconnect inverter with battery.
Although integrating battery and AC inverter together in one unit may be convenient to, there are many benefits in not doing so:
1. Heat is the worst enemy of lithium ion batteries. The AC inverter may generate a lot of heat. If you integrate the battery with the AC inverter in one unit, the battery will work in a hotter environment. This will reduce battery life time and also cause some safety concerns.
2. When the battery and inverter are two separate units, it will be much easier to replace/upgrade either one.
24V 63.8Ah (1531 Watt-hour) Lithium ion battery pack.
This battery is designed for independent use only. Do not connect this battery with another battery directly in serial or parallel. Connecting this battery with another battery may damage the battery's safety protection and power management circuit board.
Built-in charge and equalizing protection board to prevent battery from over-charging
Remarkably low self-discharge for extended storage periods up to 2 years.
More than twice the service life of conventional lead acid batteries
No corrosive liquids, no toxic heavy metals make the Li-On batteries environmentally friendly
Lightweight: only 18 pounds, less than 1/4 weight of a similar lead acid battery.
AC charger can fully charge the battery from a 100-240V AC power source in 8 ~10 hours.
Excellent substitute for traditional lead acid batteries.
This battery output terminals are separated from charge port. Charge battery from charge port only. Do not charge the battery from output terminals.
The charger will control charging voltage and current. Internal circuit will provide over charge and over discharge protection, but will not control charge voltage and current.
- Nominal Voltage: 25.2 V
- Minimum Voltage: 21V
- Maximum Voltage: 29.4V
Charge Voltage Limit
Max. Charge Current
Continuous Discharge Current
Burst Discharge Current
Operate Temp. Charge
Operate Temp. Discharge
PCB Safety Function
- Cell balancing
- Over-current protection
- Temperature protection
Battery Output Voltage:
This battery output voltage range is 21V ~ 29.5V. When the battery is fully charged, its output voltage is 29.5V. The output voltage will drop gradually during the discharge process and the final cut off voltage is 21V:
Use this battery with a DC to AC Power Inverter to provide 110V C power
The 24V DC to AC Power inverter converts battery DC power power to 110V AC power.
Small Size: (11" x 5.2" x 3.3") ; light weight: 4.4 lb
The power inverter converts the battery DC power to 110V
AC power. It has a universal AC output socket that can accept any
style of AC plugs. Its output wave form is pure since wave.
3-hole AC socket which accepts both 2-pin and 3-pin AC plugs.
Smart & quite cooling fan : The cooling fan will only work when it is needed.
The power inverter
has a specially designed handle that can easily carry the inverter around.
Advantages of Pure Sine Wave inverters over
modified sine wave inverters:
a) Output voltage wave form is pure sine
wave with very low harmonic distortion and clean power like utility-supplied
b) Inductive loads like microwave ovens and motors run faster,
quieter and cooler.
c) Reduces audible and electrical noise in fans,
fluorescent lights, audio amplifiers, TV, Game consoles, Fax, and answering
d) Prevents crashes in computers, weird print out, and glitches and
noise in monitors.
e) Reliably powers the following devices that will
normally not work with modified sine wave inverters:
Laser printers, photocopiers, magneto-optical hard drives
Certain laptop computers (you should check with your manufacturer)
Some fluorescent lights with electronic ballasts
Power tools employing "solid state" power or variable speed control
Some battery chargers for cordless tools Some new furnaces and pellet stoves
with microprocessor control
Digital clocks with radios
Sewing machines with speed/microprocessor control
X-10 home automation system
Compared to traditional inverters, which output modified sine waves, this inverter outputs AC power in pure sine waves, making it more similar to commercial power. Electronic appliances run cleaner, cooler, and quieter when running on pure sine power. As a result, pure sine inverters save energy costs and extend the life of appliances.
The pure sine inverter also reduces electronic interference, making it a
better alternative for operating sensitive audio/video equipment and medical
devices. Appliances with dimmers, speed controls, and certain battery chargers
may require pure sine power to operate.
Pure Sine Inverters are designed to increase the efficiency and
running time of electronic appliances and motors. Our Inverters operate at less
than 3–5% of Total Harmonic Distortion (THD) on average and 90% efficiency
across the line.
standard package comes with:
1. One HL2454B battery: 24V 63.8Ah, or 1531 Watt-hour.
2. One Battery AC Charger and power cord
3. One 1000W 110V Pure
Sine Power Inverter.