Super High Capacity Long Lifetime Battery with UPS Function for ResMed AirSense 10 CPAP Machine CP250-S10

Write a Review
Discount Price: $399.95
Retail Price:$699.00
Your Savings:$299.05(43%)
Part Number: LF1220-DM90S10
Availability: In Stock
Super High Capacity Long Lifetime Battery for ResMed AirSense 10 CPAP Machine with UPS Function

You may use the battery independently to power a CPAP machine.



You may also charge the battery and power CPAP machine at same time. This will provide a function like a UPS (Uninterrupted Power Supply) system:







This UPS system is very simple to use, just connect battery with AC charger and power Converter together, then connect battery AC charger to a 100V ~ 240V Power source, DC converter to CPAP machine. When AC charger has power, it will charge battery and at same time power CPAP machine. When AC charger has no power, the battery will provide power to CPAP machine. The system can support uninterrupted DC power up to 90W continues output.


This power pack can power ResMed AirSense 10 CPAP machines for 3 ~ 4 nights with the humidifier turned off. It works with the following AirStart™ 10, AirSense™ 10, and AirCurve™ 10 machines manufactured by ResMed:

• AirStart™ 10 CPAP with HumidAir™ Heated Humidifier
• AirStart™ 10 Auto CPAP with HumidAir™ Heated Humidifier
• AirSense™ 10 CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 AutoSet CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 AutoSet for Her CPAP Machine with HumidAir™ Heated Humidifier
• AirCurve™ 10 S BiLevel Machine with HumidAir™ Heated Humidifier
• AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier

Special 24V DC Power Converter for ResMed Airsense 10 devices:

Features:
  • Super small size: dimension is 2.5" x 1.9" x 0.7" ( 63.5 x 48.9 x 16.9mm)
  • Super light weight: only 2.54 oz (72g)
  • Super high efficiency: up to 96%
  • Super quiet: Fan-less design


  • Specifications:

    Input:
  • Input Voltage: 10V ~ 21V DC
  • Input Connector: 5.5 x 2.5mm Barrel
  • Connector Input Polarity: Positive

  • Output:
  • Output voltage: 24V DC
  • Maximum output: 90W ( 3.75 Amps @ 24V)
  • Output connector: Special connector for ResMed S10
  • Output cord length: 70" with ferrite
  • Adapter Dimension: 3" x 2" x 1"
  • Adapter weight: 6 oz

  • Battery Features:


    12.8V 20Ah Lithium Iron Phosphate (LiFePO4) Portable Rechargeable Battery



    High Capacity: This battery capacity is 256 Watt-hour( 12.8V 20Ah)

    Light Weight: This battery only weighs 5.6 pounds. 

    This battery has two Input/Output connectors. You may use them to charge battery or get power from battery. One end is 5.5 x 2.5mm female connector with positive polarity ( Inside positive, outside negative/ground). Another end has two wires with Anderson Power Pole connector. Red Wire is positive, Black wire is negative/ground.


    Carry bag:





    Lithium Iron Phosphate (LiFePO4)Pros:

    Long life span (5-10 years) vs lead acid (1-3 years), depending on depth of discharge and assuming that the cycle limit doesn't kill the battery first Longer cycle life, as LiFePO4 batteries last 1,000 to 3,000 charge and discharge cycles, compared to similarly sized lead-acid batteries, which can range from 200 - 1000 cycles (again, assuming depth of discharge is within recommended limits for both battery types).

    Very safe - the odds of a "thermal runaway" (aka battery fire) are very low. The same can not be said of other lithium ion chemistry.

    Specifications:

    Model No.
    • LF1220
    Chemistry
    • Lithium Iron Phosphate (LiFePO4)
    Voltage
    • Nominal Voltage: 12.8 V
    • Minimum Voltage: 10V
    • Maximum Voltage: 14.6V
    Capacity
    • 20Ah /256 Watt-hour
    Continuous Discharge Current
    • 20 A
    Maximum Discharge Current
    • 25 A
    Size
    • 7.1" x 6.5" x 3" ( 178 x 165 x 75 mm)
    Weight
    • 5.6 lb
    Operate Temp. Charge
    • 0~45 ?
    Operate Temp. Discharge
    • -20~60 ?
    Storage Temp.
    • -20~40 ?
    Cycle Life
    • 2000 Times
    PCB Safety Function
    • Cell balancing
    • Over-discharge
    • Over-current protection
    • Over-charge
    • Temperature protection
    • Secondary protection


    Charge the battery:

    This battery can be charged from any 100V ~ 240V, 50Hz/60Hz AC power source with the battery AC charger. It only takes around 4 hours to fully charge the battery


    You may use the battery while charging battery. This will make battery to services like a UPS (Uninterrupted Power Supply): The AC charger will charge battery and at same time provide power to CPAP while it has power. When AC charger has not power, the battery will provide power to CPAP Machine.










    Package Contents:




    One Battery with battery bag
    One ResMed S10 DC Converter with connection cable
    One AC Charger with Power Cord

    You may also like:

    Browse Similar Items

    TOP
    0 Items