This package comes with BiXPower BP100 battery, a high capacity (100 Wh), small size ( 180 x 110 x 22.5mm or 7.2" x 4.2" x 0.9"), light weight (621g or 1.4 lb) lithium ion rechargeable battery, a 24V DC Special Cable that is specially designed for a ResMed AirSense 10 CPAP machine.
Battery Running Time: Depending on CPAP Machine setting (such as CPAP pressure, breathing rate, optimal mask seal and whether humidifier, heated tubing and exhalation pressure relief disabled) and running environment, a CPAP machine may need as much as 90W power or as little as 10W power. So the battery running time may vary a lot. To maximum battery running time, please turn off CPAP Machine humidifier and heater, set the pressure as low as possible. The estimated running time will be around one night or so on an average CPAP pressure, average breathing rate, optimal mask seal and with the humidifier, heated tubing and exhalation pressure relief disabled.The battery pack comes with one BP100 battery + One ResMed S10 DC Special Cable + AC Charger + Car charger
This battery may power ResMed AirSense 10 CPAP machines. Provides 1 night or more of continuous run-time on an average CPAP pressure, average breathing rate, optimal mask seal and with the humidifier, heated tubing and exhalation pressure relief disabled.
This battery works with the following AirStart™ 10, AirSense™ 10, and AirCurve™ 10 machines manufactured by ResMed:
• AirStart™ 10 CPAP with HumidAir™ Heated Humidifier
• AirStart™ 10 Auto CPAP with HumidAir™ Heated Humidifier
• AirSense™ 10 CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 AutoSet CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 AutoSet for Her CPAP Machine with HumidAir™ Heated Humidifier
• AirCurve™ 10 S BiLevel Machine with HumidAir™ Heated Humidifier
• AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
To use this battery with ResMed CPAP DC converter, just set battery output voltage at 24V, plug in the special cable for ResMed to Port I:
It has compact size and light weight.
Battery Specifications:| Model: | BP100 |
Capacity: | 100 Watt-Hour |
| Battery Cell: | Lithium-ion |
| Input Charging Port: | Input Voltage Range: DC 12 ~ 24V. Connector Size: 5.5 x 2.5mm |
| Outputs: | Port I:
Output Voltage: 16V, 19V or 24V selectable
Output Connector Size: 5.5 x 2.5mm
Maximum Output Current: 4A @16V, 3.5A@19V, 2.5A@24V
Port II: Nominal Output Voltage 11.1V
Output Voltage Range 9V ~ 12.6V
Output Connector Size: 3.5 x 1.35mm;
>Maximum Output Current: 5A
Port III: 5V USB Port; Maximum Output Current: 2.A
Total maximum output with all 3 outputs: 65W
|
| Charging time /Temperature | 4-6 hours / 0~45 ?
|
| Size | 180 x 110 x 22.5mm ( or 7.2" x 4.2" x 0.9") |
| Weight: | 621g ( or 1.4 lb) |
| Power Indicator: | 4 level LED indicator |
| Built-in Protection Circuit: | -Over-charge ; Over-discharge; Over current ;Over temperature
- Short circuit protection |
| Operating Temperature: | -20~ 60 C |
| Storage Temperature: | - 20~40 C
|
This battery is made with high quality Panasonic Li-ion battery cells and is compatible with many devices . Set the output voltage at 24V DC, with specially designed cable, it can power ResMed S10 series CPAP Machines. 
This Universal External Lithium Rechargeable Battery Pack can provide power for laptop computers, digital cameras, digital photo frames, PDAs, cell phones, DVD players.
This battery features 3 output ports.
Output Port I
Output Port I features 3 different regulated voltages through a hardware volt selection switch:
16V, 19V, 24V.
Please set the port I output voltage at 24V for CPAP Machines
Special Cable will work with ResMed S10 series CPAP machines.
One end of cable connect to battery 24V port, another end connect to CPAP machine.
Please note that a regular cable may not work for ResMed machines even connector size is correct. This cable has been specially configured internally for ResMed machines special need.
Output III is a 5V USB port. Its maximum output current is 2.1A, which can be used to power or charge iPad, tablet computers and any other device that can be charged from a USB port (USB power cable not included).
This battery can be charged from any 100V ~ 240V, 50Hz/60Hz AC power source with the battery AC charger.
Or charge battery from a 12V car cigarette socket:
This battery has built-in charging controller to control the charging process. It can accept a very wide range of voltage for charging. You can use a regular power adapter with 12V to 24V DC power to charge the battery. The battery charge port is a 5.5 x 2.5mm female jack, therefore a 5.5 x 2.5mm male connector is required.
Package:
