BiXPower BP100 X2 High Capacity ( 100Wh x2 = 200Wh) Batteries for ResMed AirSense 11 CPAP Machine

Write a Review

On sale ~~$499.95~~ $369.95

Retail Price:$699.95

Your Savings:$330.00(47%)

Part Number: BP100X2-AS11

Availability: In Stock

Quantity

Description

This package comes with Two High capacity, small size, light weight BiXPower BP100 rechargeable batteries, ( each battery has 100Wh high capacity, total capacity 200 Watt-hour ). With a special DC Special Cable that is specially designed for a ResMed AirSense 11 CPAP machine.

The battery pack comes with Two BP100 batteries + One Power Special Cable for AirSense 11 + One Y25 Split cable + AC Charger + Car Charger

Two batteries together may power ResMed AirSense 11 CPAP machines 2 ~ 4 nights of continuous run-time on an average CPAP pressure, average breathing rate, optimal mask seal and with the humidifier, heated tubing and exhalation pressure relief disabled. However, this is just a very rough estimation. AirSense 11 CPAP Machine power drawing varies a lot at different setting and running environment. For example, machine may only draw 10W ~ 12W power at very low pressure setting, battery can last 16 hours. The machine may draw 20W ~ 25W power at moderate setting , then battery can only last 8 hours. To maximum battery running time, please turn off CPAP Machine humidifier and heater, set the pressure as low as possible (with your doctor approval).

You may use each BP100 battery separately with ResMed CPAP cable, just plug in the ResMed DC converter to Output port I ( set to 24V)of a BP100 battery like this:

You may also use two batteries together. Just set Battery 1 and Battery 2 Port I output voltage at same voltage at 24V, plug Y25 split cable male ends to Battery 1 and Battery 2 (Port I), then plug S10 special cable to Y25 split cable female end, just like this:

BP100 battery compact size allows it to easily fit into a laptop/notebook carry bag.

Battery Specifications:

Model:	BP100
Capacity:	100 Watt-Hour
Battery Cell:	Lithium-ion
Input Charging Port:	Input Voltage Range: DC 12 ~ 24V. Connector Size: 5.5 x 2.5mm
Outputs:	Port I: Output Voltage: 16V, 19V or 24V selectable Output Connector Size: 5.5 x 2.5mm Maximum Output Current: 4A @16V, 3.5A@19V, 2.5A@24V Port II: Nominal Output Voltage 11.1V Output Voltage Range 9V ~ 12.6V Output Connector Size: 3.5 x 1.35mm; >Maximum Output Current: 5A Port III: 5V USB Port; Maximum Output Current: 2.A Total maximum output with all 3 outputs: 65W
Charging time /Temperature	4-6 hours / 0~45 ?
Size	180 x 110 x 22.5mm ( or 7.2" x 4.2" x 0.9")
Weight:	621g ( or 1.4 lb)
Power Indicator:	4 level LED indicator
Built-in Protection Circuit:	-Over-charge ; Over-discharge; Over current ;Over temperature - Short circuit protection
Operating Temperature:	-20~ 60 ?
Storage Temperature:	- 20~40 ?

This battery is made with high quality Panasonic Li-ion battery cells and is compatible with many devices that need 15V, 16V, 16.5V, 18V, 18.5V, 19V, 19.5V, 20V or 24V DC power. The 24V voltage with special cable specially designed for the ResMed CPAP Machine can output voltage to 24V DC power with special configuration. The 5V USB port can power many small devices such as smart phones, tablets.

This Universal External Lithium Rechargeable Battery Pack can provide power for laptop computers, digital cameras, digital photo frames, PDAs, cell phones, DVD players.

This battery features 3 output ports.

Output Port I

Output Port I features 3 different regulated voltages through a hardware volt selection switch: 16V, 19V, 24V. This port can be used to power laptop notebook computers. Please set the port I output voltage close to your laptop power adapter output voltage or laptop's input voltage.

Please set voltage at 24V for ResMed AirSense 11 machines

Special cable for ResMed:

You may also use BP100 battery for other devices. It has two other ports: Output Port II & Port III

Port II's output voltage range is 9V to 12.6V. Nominal voltage is 11.1V. When the battery is fully charged, its voltage is 12.6V. Output voltage will then decrease gradually. Most of the time, the output voltage will be around 10V ~ 11V ( nominal voltage is 11.1V). When the voltage drops to 9V, the port will shut off and stop providing power. This port can be used to power portable DVD players and digital photo frames.

Output III is a 5V USB port. Its maximum output current is 2.1A, which can be used to power or charge iPad, tablet computers and any other device that can be charged from a USB port (USB power cable not included).

Charge the battery: This battery can be charged from any 100V ~ 240V, 50Hz/60Hz AC power source with the battery AC charger.

You may charge each battery separately:

You may also charge two batteries together with Y25 split cable like this:

You may use battery while it is under charging.

This battery has built-in charging controller to control the charging process. It can accept a very wide range of voltage for charging. You can use a regular power adapter with 12V to 24V DC power to charge the battery. The battery charge port is a 5.5 x 2.5mm female jack, therefore a 5.5 x 2.5mm male connector is required.

Car Charger:

You may also charge batteries from a 12V car cigarette socket with cr charger:

You may also charge two batteries together with split dongle:

Package Contents:

The battery pack comes with Two BP100 batteries + One ResMed AirSense 11 Power Cable + One Y25 Split cable + AC Charger + Car Charger

Battery Running Time: Depending on CPAP Machine setting and running environment, a CPAP machine may need as much as 90W power or as little as 10W power. So the battery running time may vary a lot: from 2 hours to 20 hours. To maximum battery running time, please turn off CPAP Machine humidifier and heater, set the pressure as low as possible (with your doctor approval).

High Capacity Multi Outputs Rechargeable Battery Pack - BP100

$219.95

In Stock

Select Options

BiXPower BP100 X2 High Capacity ( 100Wh x2 = 200Wh) Batteries for ResMed AirSense 11 CPAP Machine

Related Parts & Accessories