This package comes with Two High capacity, small size, light weight BiXPower BP100 rechargeable batteries
, ( each battery has 96Wh high capacity ,with small size : 180 x 110 x 22.5mm or 7.2" x 4.2" x 0.9" and light weight: 621g or 1.4 lb). With a special DC Special Cable that is specially designed for a ResMed AirSense 10 CPAP machine.
The battery pack comes with Two
BP100 batteries + One ResMed S10 DC Special Calbe + One Y25 Split cable + AC Charger + Car Charger
Two batteries together may power ResMed AirSense 10 CPAP machines 2 ~ 4 nights
of continuous run-time on an average CPAP pressure, average breathing rate, optimal mask seal and with the humidifier, heated tubing and exhalation pressure relief disabled.
The battery works with the following AirStart™ 10, AirSense™ 10, and AirCurve™ 10 machines manufactured by ResMed:
• AirStart™ 10 CPAP with HumidAir™ Heated Humidifier• AirStart™ 10 Auto CPAP with HumidAir™ Heated Humidifier• AirSense™ 10 CPAP Machine with HumidAir™ Heated Humidifier• AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier• AirSense™ 10 AutoSet CPAP Machine with HumidAir™ Heated Humidifier• AirSense™ 10 AutoSet for Her CPAP Machine with HumidAir™ Heated Humidifier• AirCurve™ 10 S BiLevel Machine with HumidAir™ Heated Humidifier• AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
You may use each BP100 battery separately with ResMed CPAP cable, just plug in the ResMed DC converter to Output port I ( set to 24V
of a BP100 battery like this:
You may also use two batteries together. Just set Battery 1 and Battery 2 Port I output voltage at same voltage at 24V, plug Y25 split cable male ends to Battery 1 and Battery 2 (Port I), then plug S10 special cable to Y25 split cable female end, just like this:
BP100 battery compact size allows it to easily fit into a laptop/notebook carry bag.
This battery is made with high quality Panasonic Li-ion battery cells and is compatible with many devices that need 15V, 16V, 16.5V, 18V, 18.5V, 19V, 19.5V, 20V or 24V DC power. The 24V voltage with special cable specially designed for the ResMed CPAP Machine can output voltage to 24V DC power with special configuration. The 5V USB port can power many small devices such as smart phones, tablets.
|Input Charging Port:||Input Voltage Range: DC 12 ~ 24V. Connector Size: 5.5 x 2.5mm|
Output Voltage: 16V, 19V or 24V selectable
Output Connector Size: 5.5 x 2.5mm
Maximum Output Current: 4A @16V, 3.5A@19V, 2.5A@24V
Port II: Nominal Output Voltage 11.1V
Output Voltage Range 9V ~ 12.6V
Output Connector Size: 3.5 x 1.35mm;
>Maximum Output Current: 5A
Port III: 5V USB Port; Maximum Output Current: 2.A
Total maximum output with all 3 outputs: 65W
|Charging time /Temperature||4-6 hours / 0~45 ?|
|Size||180 x 110 x 22.5mm ( or 7.2" x 4.2" x 0.9")|
|Weight:||621g ( or 1.4 lb)|
|Power Indicator:||4 level LED indicator|
|Built-in Protection Circuit:|
-Over-charge ; Over-discharge; Over current ;Over temperature
- Short circuit protection
-20~ 60 C
- 20~40 C
This Universal External Lithium Rechargeable Battery Pack can provide power for laptop computers, digital cameras, digital photo frames, PDAs, cell phones, DVD players.
This battery features 3 output ports.Output Port I
Output Port I features 3 different regulated voltages through a hardware volt selection switch: 16V, 19V, 24V. This port can be used to power laptop notebook computers. Please set the port I output voltage close to your laptop power adapter output voltage or laptop's input voltage.
Please set voltage at 24V for ResMed S10 machines