High Capacity: 36V 14Ah (504 Watt-hour)
Light Weight: only around 5.5 pound. ( A equivalent capacity Sealed Lead Acid battery may weigh around 30~40 pounds.)
Small Size: 9.8" x 4.4" X 3", easy to fit on many different place on bike.
Very Powerful: continuous output up to 450W ~ 540W, maximum burst output up to 540W ~ 640W.
High Quality: Made with high quality Panasonic Lithium Ion cells.
High Durability:
Water-resistant and firm ABS plastic casing. The internal pack is
stabilized by braces that can avoiding mechanical accidents caused by
vibration.
High Safety: Built-in PCB protection to prevent short circuit, over-current, over-heat, over-charge, over-discharge.
|
1
|
4-Level LED indicator
|
|
2
|
15A Fuse
|
|
3
|
Power on/off
|
|
4
|
Handlebar
|
|
5
|
Battery contact socket
|
|
6
|
Charging input jack
|
|
Output Voltage: 30V ~ 42V, Nominal Voltage: 36V;
Maximum Continuous Output Current: 15A ;
Maximum Burst Output Power ( up to 10 minutes) Current: 18A
Features:
Safety Equipment
- - Water-resistant and firm ABS plastic casing.
- - Built-in PCB protection.
- - Prevent short circuit, over-current, over-heat, over-charge, over-discharge.
- - The internal pack is stabilized by braces.
- - Avoiding mechanical accidents caused by vibration.
Specifications:
|
Model No.
|
|
|
Cell Brand
|
|
|
|
|
Chemistry
|
|
|
Voltage
|
- Nominal Voltage: 36 V
- Minimum Voltage: 30V
- Maximum Voltage: 42.55V
|
|
Capacity
|
|
|
Rate
|
|
|
Configuration
|
|
|
Inner Resistance
|
|
|
Charge Voltage Limit
|
|
|
Max. Charge Current
|
|
|
Continuous Discharge Current
|
|
Burst Discharge Current
(up to 10 minutes)
|
|
|
Size
|
- 245.00 x 110.00 x 75 mm
- ( or 9.8" x 4.4" X 3")
|
|
Weight
|
|
|
Operate Temp. Charge
|
|
|
Operate Temp. Discharge
|
|
|
Storage Temp.
|
|
|
Cycle Life
|
|
|
PCB Safety Function
|
- Cell balancing
- Over-discharge
- Over-current protection
- Over-charge
- Temperature protection
- Secondary protection
|
Small Size and Light Weight:This battery weight is only around
5.5 pounds (same capacity Lead-Acid battery will be around 30 ~ 40 pound).
Lithium-ion battery vs. Lead Acid Battery
Using Lithium-ion battery
offers many advantages over older SLA (Sealed Lead Acid) battery
because of Lithium-ion battery's high energy density, small size, and
low weight. A typical Lithium-ion battery may only has
1/4 of the weight and
1/2 of the size compared to a same capacity traditional heavy bulky Sealed Lead Acid battery.
BiXPower Lithium-ion batteries are made with premium brand Lithium-ion
battery cells. We have some of the lightest and most powerful
replacement batteries available with top quality. Compare to lead-acid
batteries, BiXPower Lithium ion batteries have a much slower
self-discharge than the best lead acid batteries. This means that they
can still work even if the remaining capacity is low. A fully charged
BiXPower Lithium ion battery can sit for a year or more and still retain
adequate capacity, without damaging the battery.
No explosive gasses during charge, no lead, no acid, environmentally
friendly.
|
Battery Type
|
Lithium ion Battery
|
Lead Acid Battery
|
|
Voltage fluctuation in working
|
Remains stable with different output
|
Voltage fluctuation based on output
|
Cycle life
(Residual capacity over 5%)
|
500 ~1000 cycles
|
150~300 times
|
|
Capacity
|
Very stable and very little affection by output current
|
Suffer a big affection in by output current. Capacity will be much
smaller than rated capacity when output current is large.
|
|
Depth Of Discharge (D.O.D.)
|
99%
|
50% ~ 60%
|
|
Self discharge rate (per month)
|
1~1.5% (Capacity remains over 80% even the battery is idled for one year)
|
30% (Battery capacity drops near to zero if it is unused for 3 months)
|
|
Fast charge capability
|
Charge to full capacity in about 6 hours
|
8 ~ 12 hours to fully charge the battery
|
|
Discharge working temperature ?
|
-20~+60
|
-20~+55
|
|
Memory effective
|
None
|
None
|
|
Thermal stability
|
Outstanding
|
Acceptable
|
|
Weight (Compare to the same capacity)
|
1/4 of weight to lead acid battery
|
comparatively heavier weight
|
|
Installation
|
Any direction
|
Upright position is necessary
|
|
Safety
|
Built-in safety protection function
|
Danger of acid leakage
|
Environmental conform-ability
|
Conforms to RoHs standard
|
Violates RoHs standard;Lead and sulphate acid are pollutant
|
|
Disposition of used battery
|
Lithium-ion batteries are
generally not considered an environmental hazard because they do not
contain lithium metal. The United States government labels them as
non-hazardous waste and does not oppose them being discarded together
with the trash that makes up the local waste stream.
|
Needs special recycling after treatment utility
|
Package Contents:The battery comes with a AC charger and output box. The AC charger can charge the battery from 100V ~ 240V AC power source.
Output Box:KF562 Holder & Output Box can be
used as a battery holder and mount on the frame vertically or horizontally.
The battery then can slide on /off to the output box and locked with key. It is
designed for multi-direction installation. User can change the position of
battery (vertically / horizontally) by adjusting the clamp.
Optional Flat Cover Output
Box
If you do not need to mount the battery to
anywhere, you may also select Output Box with
optional flat cover to same some space. It looks like
this:
Following pictures show how the output box looks with flat cover and how the battery looks with flat cover output box:
LED Display:
Safety Features:
- Water-resistant and firm ABS plastic casing.
- - Built-in PCB protection.
- - Prevent short circuit, over-current, over-heat, over-charge, over-discharge.
- - The internal pack is stabilized by braces.
- - Avoiding mechanical accidents caused by vibration.
|
The Four-level LED indicates current power status.
|
|
The 15A fuse, serves as a second protection device, can prevent the battery pack from excessive discharge.
|
|
|
|
It is easy to hold the battery with the well designed handlebar.
|
|
Battery can be recharged either by fastening on the bike or by itself with the provided AC adapter.
|
|
|
|
The LED (at the power button controls on/off of the battery) glows when power is on.
|
|
The key lock is used to fix the battery onto the holder.
|
|
Battery Output Box can be welded on the bike vertically or horizontally.
|
|
The optional Output Box KF542 is designed for multi-direction
installation. User can change the position of battery (vertically /
horizontally) by adjusting the clamp.
|
|
Battery can be installed easily. Simply slide the battery towards the holder by following the track
.
|
|
|
Accessories:
1. AC Charger
- Size: 115.15 x 58.90 x 31.30 mm
- Input Voltage: 100-240 V
- Output Voltage: 42.5 V
- Output Current: 1.5 A
- Safety Requirements: CCC, CE
|
|
2. Power Cord 
American Type Adapter Power Cord, Length: 1000 mm
3. Optional Flat Output Box
|
|
|
- Size: 158.00 x 95.00 x 28.00 mm
- Wire Length: 1500 mm
 |
|
|
|
|
|
|
4. Standard Output Box (Model# KF562)
One Year limited warranty. The one year limited
warranty covers manufacturing and quality defects only. Please note that
batteries wear out with use. The amount of charge a battery can hold
gradually decreases due to usage and aging, which is normal, and this is
not the issue covered by warranty.
