24V 322Wh (12.8Ah @ 25.2V) Light Weight Lithium Ion Battery for electric bicycles and other devices that require 24V high power up to 300W. Made with high quality Panasonic Lithium Ion cells.
Note: this battery maximum output is 300W.
It is recommend to use with devices need 300W or less power. If your bicycles or scooters require more than 300W power, you may not use this battery.
|
1
|
4-Level LED indicator
|
|
2
|
15A Fuse
|
|
3
|
Power on/off
|
|
4
|
Handlebar
|
|
5
|
Battery contact socket
|
|
6
|
Charging input jack
|
|
Output Voltage: 20V ~ 29.75V, Nominal Voltage: 25.2 V;
Maximum Continuous Output Current: 15A
Features:
Safety Equipment
- - Water-resistant and firm ABS plastic casing.
- - Built-in PCB protection.
- - Prevent short circuit, over-current, over-heat, over-charge,
over-discharge.
- - The internal pack is stabilized by braces.
- - Avoiding mechanical accidents caused by vibration.
Specifications:
|
Model No.
|
|
|
|
|
Chemistry
|
|
|
Voltage
|
- Nominal Voltage: 25.2 V
- Minimum Voltage: 20.5V
- Maximum Voltage: 29.75V
|
|
Capacity
|
|
|
Rate
|
|
|
Configuration
|
|
|
Inner Resistance
|
|
|
Charge Voltage Limit
|
|
|
Max. Charge Current
|
|
|
Continuous Discharge Current
|
|
Burst Discharge Current
(up to 10 minutes)
|
|
|
Size
|
- 175.00 x 110.00 x 75.00 mm
- ( or 6.8" x 4.3" X 3")
|
|
Weight
|
|
|
Operate Temp. Charge
|
|
|
Operate Temp. Discharge
|
|
|
Storage Temp.
|
|
|
Cycle Life
|
|
|
PCB Safety Function
|
- Cell balancing
- Over-discharge
- Over-current protection
- Over-charge
- Temperature protection
- Secondary protection
|
Small Size and Light Weight:This battery weight is only around
3.8 pounds (same capacity Lead-Acid battery will be around 16 pound).
Using Lithium-ion battery offers many advantages over older SLA
(Sealed Lead Acid) battery because of Lithium-ion battery's high
energy density, small size, and low weight. A typical Lithium-ion
battery may only has
1/4 of weight and
1/2 of size compare to same capacity traditional heavy bulky Sealed Lead Acid battery.
Package Contents:The battery comes
with a AC charger and output box. The AC charger can charge the battery
from 100V ~ 240V AC power source.
Output Box:The output box can slide to battery contact socket, provide output
cable with 2 wires: red wire is +24V, black wire is ground.
KF542B Output box: If you are using this battery for a e-bike, you may select this output box. This output box comes with a lock for mounting on a bike or other devices.
Output Box (Model # KF542B)
Size: 95.00 x 89.00 x 59.00 mm (3.7" x 3.5"
x 2.3")
The output
box is lockable: if locked, it can not be removed from the battery. If
unlocked, it can slide on/off the battery contact socket easily.
LED Display:
Safety Features:
- Water-resistant and firm ABS plastic casing.
- - Built-in PCB protection.
- - Prevent short circuit, over-current, over-heat, over-charge, over-discharge.
- - The internal pack is stabilized by braces.
- - Avoiding mechanical accidents caused by vibration.
|
The Four-level LED indicates current power status.
|
|
The 15A fuse, serves as a second protection device, can prevent the battery pack from excessive discharge.
|
|
|
|
It is easy to hold the battery with the well designed handlebar.
|
|
Battery can be recharged either by fastening on the bike or by itself with the provided AC adapter.
|
|
|
|
The LED (at the power button controls on/off of the battery) glows when power is on.
|
|
The key lock is used to fix the battery onto the holder.
|
|
Battery Output Box can be welded on the bike vertically or horizontally.
|
|
The optional Output Box KF542 is designed for multi-direction installation. User can change the position of battery (vertically / horizontally) by adjusting the clamp.
|
|
Battery can be installed easily. Simply slide the battery towards the holder by following the track
.
|
|
|
Accessories:
1. AC Charger
- Size: 115.15 x 58.90 x 31.30 mm
- Input Voltage: 100-240 V
- Output Voltage: 29.7 V
- Output Current: 1.5 A
- Safety Requirements: CCC, CE
|
|
2. Power Cord
American Type Adapter Power Cord, Length: 1000 mm
3. Output Box (Model# KF542)
