Power any device anytime, anywhere by using its own AC
power adapter.
This power station comes with a super high
capacity light weight rechargeable lithium ion battery ( 36V 11.6Ah or 418Wh) and a 600W power inverter that
converts the battery power to 10V AC power. Just link the power inverter to the battery, then
plug your device's AC power adapter to the power inverter
Although integrating battery and AC inverter together in one unit may be convenient to, there are many benefits in not doing so:1. Heat is the worst enemy of lithium ion batteries. The AC inverter may generate a lot of heat. If you integrate the battery with the AC inverter in one unit, the battery will work in a hotter environment. This will reduce battery life time and also cause some safety concerns.
2. When the battery and inverter are two separate units, it will be much easier to replace/upgrade either one.
Battery Features:Small Size and Light Weight:This
battery weighs only around 5 pounds.
Lithium-ion battery vs. Lead Acid Battery
Using a Lithium-ion battery offers many advantages over older SLA (Sealed Lead Acid) batteries because of Lithium-ion's high energy density, small size, and low weight. A typical Lithium-ion battery may only be 1/5 of the weight and 1/2 of the size compared to a same capacity traditional heavy bulky Sealed Lead Acid batter.
LED Display:
The Four-level LED
indicates current power status.
AC Charger:
This battery comes with its
own AC charger that can charge the battery from any 110V ~ 240V AC power
source.
Safety Features:
- Water-resistant and firm ABS plastic casing.
- Built-in PCB protection.
- Prevent short circuit, over-current, over-heat, over-charge, over-discharge.
- The internal pack is stabilized by braces, thereby avoiding mechanical accidents caused by vibration.
Specifications:
Model No.
|
|
Cell Brand
|
|
|
|
Chemistry
|
|
Voltage
|
- Nominal Voltage: 37 V
- Minimum Voltage: 30V
- Maximum Voltage: 42.5V
|
Capacity
|
|
Rate
|
|
Configuration
|
|
Inner Resistance
|
|
Charge Voltage Limit
|
|
Max. Charge Current
|
|
Continuous Discharge Current
|
|
Burst Discharge Current
(up to 10 minutes)
|
|
Size
|
- 7.5" x 5" X 3.8" ( or 180 x 123 x 92mm)
|
Weight
|
|
Operate Temp. Charge
|
|
Operate Temp. Discharge
|
|
Storage Temp.
|
|
Cycle Life
|
|
PCB Safety Function
|
- Cell balancing
- Over-discharge
- Over-current protection
- Over-charge
- Temperature protection
- Secondary protection
|
Power Inverter
Features:
The power inverter converts the battery DC power to 110V
AC power. It has a universal AC output socket that can accept any
style of AC plugs. The inverter's maximum output can be as high as 600W. ( so for this pack, maximum output will be around 450W due to limitation of battery).s output wave form is pure since wave.
Smart cooling fan : The cooling fan will only work when it is needed.
This inverter is very small (9.5" x 4.5" x 2.3") and light weight(2.3 lb.) It is very easy to carry.
The inverter can easily connect to BiXPower 36V battery
3-hole AC
socket which accepts both 2-pin and 3-pin AC plugs.
The power inverter
has a specially designed connector that can easily link to the battery.
Advantages of Pure Sine Wave inverters over
modified sine wave inverters:
a) Output voltage wave form is pure sine
wave with very low harmonic distortion and clean power like utility-supplied
electricity.
b) Inductive loads like microwave ovens and motors run faster,
quieter and cooler.
c) Reduces audible and electrical noise in fans,
fluorescent lights, audio amplifiers, TV, Game consoles, Fax, and answering
machines.
d) Prevents crashes in computers, weird print out, and glitches and
noise in monitors.
e) Reliably powers the following devices that will
normally not work with modified sine wave inverters:
Laser printers, photocopiers, magneto-optical hard drives
Certain laptop computers (you should check with your manufacturer)
Some fluorescent lights with electronic ballasts
Power tools employing "solid state" power or variable speed control
Some battery chargers for cordless tools Some new furnaces and pellet stoves
with microprocessor control
Digital clocks with radios
Sewing machines with speed/microprocessor control
X-10 home automation system
Medical equipment such as oxygen concentrators
Compared to traditional inverters, which output modified sine waves, this inverter outputs AC power in pure sine waves, making it more similar to commercial power. Electronic appliances run cleaner, cooler, and quieter when running on pure sine power. As a result, pure sine inverters save energy costs and extend the life of appliances.
The pure sine inverter also reduces electronic interference, making it a
better alternative for operating sensitive audio/video equipment and medical
devices. Appliances with dimmers, speed controls, and certain battery chargers
may require pure sine power to operate.
Pure Sine Inverters are designed to increase the efficiency and
running time of electronic appliances and motors. Our Inverters operate at less
than 3–5% of Total Harmonic Distortion (THD) on average and 90% efficiency
across the line.
Package contents:1. One BX3691 battery: 36V 11.6Ah, or 418
Watt-hour.
2. One Battery AC Charger and power cord
3. One 500W 110V Pure
Sine Power Inverter with connection cable
4. One Connection Box